Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manual de usuario descargar pdf (Pagina 25)

AERCO ProtoNode Gateway

User Manual

OMM-0080_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 25 of 126

GF-129 Ph.: 800-526-0288 11/06/2014

4.4 Commissioning ProtoNode LER on a LonWorks Network

Commissioning may only be performed by the LonWorks administrator. The User

will be prompted by the LonWorks Administrator to hit the Service Pin on the ProtoNode

LER at the correct step of the Commissioning process which is different for each

LonWorks Network Management Tool.

If an XIF file is required, see steps in Section 4.5.

Figure 4-5: LonWorks Service Pin Location

4.5 Instructions to Upload XIF File from ProtoNode LER Using FS GUI

Web Server

• Connect a standard cat5 Ethernet cable between the PC and ProtoNode

• The Default IP Address of ProtoNode is 192.168.1.24, Subnet Mask is

255.255.255.0. If the PC and ProtoNode are on different IP Networks, assign a static

IP Address to the PC on the 192.168.1.xxx network

• For Windows XP:

Go to > >

Right-click on Local Area Connection > Properties

Highlight >

• For Windows 7:

Go to > >

> >

Right-click on Local Area Connection > Properties

Highlight >

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 125 126

Sin comentarios

Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manual de usuario Pagina 25