Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manual de usuario descargar pdf (Pagina 30)

AERCO ProtoNode Gateway

User Manual

Page 30 of 126 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0080_0H

11/06/2014 Ph.: 800-526-0288 GF-129

5.3 Set IP Address for BACnet/IP and Modbus TCP

• Open a PC web browser, enter the default IP address of the ProtoNode 192.168.1.24

and connect to the ProtoNode.

• From the GUI main landing, click on Diagnostics and Debugging to get to the Utilities

section of the GUI (to change IP Address and other capabilities). (Figure 5-3)

Figure 5-3: Changing IP Address using Main Landing Page for ProtoNode

• From the GUI’s Utility page, click on setup and then Network Settings to enter the Edit

IP Address Settings menu.

• Modify the IP address (N1 IP address field) of the ProtoNode Ethernet port.

• If necessary, change the Netmask (N1 Netmask field).

• Type in a new Subnet Mask

• If necessary, change the IP Gateway (Default Gateway field)

• Type in a new IP Gateway

• Note: If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode

should be set to the IP address of the router that it is connected to

• Reset ProtoNode by selecting “System Restart” or cycling the power.

• Unplug Ethernet cable from PC and connect it to the network hub or router

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 125 126

Sin comentarios

Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manual de usuario Pagina 30