Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manual de usuario descargar pdf (Pagina 32)

AERCO ProtoNode Gateway

User Manual

Page 32 of 126 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0080_0H

11/06/2014 Ph.: 800-526-0288 GF-129

CHAPTER 6: Install and Run the Utility Software to Setup IP

Address for BACnet/IP using RUInet

1) Go to the ProtoCessor web site http://fieldserver.com/techsupport/utility/utility.php and download

the RUInet Utilities by clicking on INSTALL.ZIP, circled below.

Figure 6-1: Downloading RUInet Utilities

2) Run Install.zip and follow the installation instructions

3) Once installed, the FieldServer Utilities can be located in the Windows Start menu as a

desktop icon

6.1 Connect the PC to the ProtoNode via the Ethernet port

Figure 6-2: Ethernet port location of ProtoNode

1) Connect a standard CAT5 Ethernet cable (straight through or cross) between the PC

and ProtoNode.

2) The Default IP Address of the ProtoNode is 192.168.1.24, Subnet Mask is

255.255.255.0. If the PC and the ProtoNode are on different IP Networks, assign a static

IP Address to the PC on the 192.168.1.xxx network.

3) Go to:

> >

ProtoNode LER

ProtoNode RER

10/100 Base T

Ethernet

Connector

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 125 126

Sin comentarios

Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manual de usuario Pagina 32